Certified Aerial Lift / Work Platform Operator Training
Sign up to apply coupon codes.
Course Description
This program is designed for individuals who work from, or operate, boom lifts, scissor lifts, and/or push-around equipment. It covers all safety aspects regarding pre- and post-use checks, regulations, fall protection, and general use. The course format includes a combination of presentations, question-and-answer sessions, practical applications, and a final exam.Aerial lifts, also known as boom lifts, bucket trucks, and cherry pickers, are widely used throughout construction and general industry workplaces. While generally safer than ladders or climbing to heights, aerial lifts still pose significant risks to workers.
Each year, more than 26 workers are killed in aerial lift-related accidents. During seven years, there were 207 fatal aerial lift accidents, with the most common causes being electrocution (69) and falls (64), representing more than half of all fatalities.
To prevent these types of injuries, OSHA requires employees to receive proper training on aerial lifts before using them in the workplace. This training program is specifically designed to provide that essential instruction and ensure worker safety.
What You'll Learn
- This course covers the following:
- Pre- and post-use of equipment.
- Explanations of electrical hazards.
- Fall and falling object hazards.
- Recognizing and avoiding unsafe conditions in the work setting.
- Instructions for the correct operation of the lift, including maximum intended load and load capacity.
- Demonstrations of the skills and knowledge needed to operate an aerial lift before operating it on the job.
- When and how to perform inspections, and the manufacturer’s requirements.
- OSHA Standards Covered:
- 29 CFR 1910.67.
- 29 CFR 1910.269(p).
- 29 CFR 1926.21.
- 29 CFR 1926.453.
- 29 CFR 1926.502.
- American National Standards Institute (ANSI) Standards:
- ANSI/SIA A92.2-1969.
- ANSI/SIA A92.3.
- ANSI/SIA A92.5.
- ANSI/SIA A92.6.
Who Should Attend
Any employee who operates, maintains, or supervises employees using an aerial lift. An aerial lift is any vehicle-mounted device used to elevate personnel, including: Extendable boom platforms, Aerial ladders, Articulating (jointed) boom platforms, Vertical towers, and Any combination of the above.
Certified Aerial Lift / Work Platform Operator Training Blueprint
1. Overview
The Certified Safety Health Specialist - General Industry (CAL/WPOT) blueprint summarizes the examination structure and core knowledge areas aligned to the IASHEP General Industry course. The source course emphasizes 29 CFR 1910 safety regulations and standards, OSHA policies and procedures, hazard recognition, workplace inspections, risk assessments, incident investigations, corrective actions, and safety program implementation.
2. Examination Parameters
| Duration | 4 Day course alignment |
| Total Questions | Standardized assessment |
| Question Format | Multiple-choice and scenario-based |
| Passing Score | Standard passing requirement |
3. Prerequisites & Qualifications
Candidates for this certification generally have responsibilities in workplace safety, compliance, supervision, industrial hygiene, facility operations, risk management, or program administration. Preparation should include:
- Familiarity with OSHA general industry requirements and 29 CFR 1910 standards.
- Ability to recognize common workplace hazards and recommend controls.
- Understanding of inspections, risk assessments, incident investigations, and corrective action planning.
- Practical experience supporting or managing safety and health programs.
4. Examination Domains
| Domain Name | Weight (%) | Number of Questions |
|---|---|---|
| 1. OSHA General Industry Regulations and Compliance | 25% | 25 |
| 2. Hazard Identification and Risk Assessment | 20% | 20 |
| 3. Safety Program Implementation and Hazard Controls | 20% | 20 |
| 4. Workplace Inspections and Corrective Actions | 15% | 15 |
| 5. Incident Investigation and Prevention Planning | 10% | 10 |
| 6. Communication, Training, and Professional Application | 10% | 10 |
| TOTAL | 100% | 100 |
5. Domain Breakdown
Domain 1: OSHA General Industry Regulations and Compliance
Weight: 25%
Knowledge of:
- OSHA general industry regulations, standards, policies, and procedures.
- 29 CFR 1910 safety regulation/standard structure and application.
- Regulatory compliance requirements for workplace safety and health programs.
- Use of OSHA standards as a guide for identifying high-hazard areas.
Domain 2: Hazard Identification and Risk Assessment
Weight: 20%
Knowledge of:
- Recognition of common workplace hazards including chemical, electrical, machinery, ergonomics, and environmental risks.
- Risk assessment methods for prioritizing hazards and exposures.
- Hazard identification, avoidance, control, and prevention concepts.
- Selection of practical control strategies based on observed workplace conditions.
Domain 3: Safety Program Implementation and Hazard Controls
Weight: 20%
Knowledge of:
- Implementation of effective safety programs and hazard control measures.
- Accident prevention strategies and corrective action planning.
- General industry safety and health principles as applied to real-world situations.
- Integration of safety procedures into routine operations.
Domain 4: Workplace Inspections and Corrective Actions
Weight: 15%
Knowledge of:
- Planning and conducting workplace inspections.
- Documenting inspection findings and identifying corrective actions.
- Evaluating facility, maintenance, production, and healthcare work environments.
- Communicating inspection results to supervisors, coordinators, and managers.
Domain 5: Incident Investigation and Prevention Planning
Weight: 10%
Knowledge of:
- Incident investigation principles and root-cause awareness.
- Corrective action planning following accidents, near misses, or identified hazards.
- Use of incident findings to improve hazard control and prevention programs.
- Follow-up activities to verify corrective actions are completed.
Domain 6: Communication, Training, and Professional Application
Weight: 10%
Knowledge of:
- Communicating OSHA requirements and safety expectations to workers and management.
- Supporting training, orientation, and safety awareness activities.
- Applying course knowledge immediately in workplace settings.
- Professional responsibilities for safety supervisors, coordinators, industrial hygienists, facility managers, line supervisors, and program administrators.
6. Additional Information
Course Alignment:
- IASHEP CSHS-GI course page identifies the course as a 4-day intermediate General Industry course.
- The course description identifies 29 CFR 1910 safety regulations/standards as the primary focus.
- The course outcomes include OSHA compliance, hazard identification, safety program implementation, workplace inspections, risk assessments, incident investigations, and corrective action planning.
Source: IASHEP course page, Certified Safety Health Specialist - General Industry (CAL/WPOT), accessed May 14, 2026.